dc power supply plugs / jacks standard plug gauge material: hardening stainless steel or gauge steel. surface roughness shall be 0.8s, excluding handle of plug gauge. ap cp ep fp gp hp 1 ?.75 ?.40 c0.35 c0.35 (9.5) (8.5) 2 ?.75 ?.05 c0.35 c0.35 (9.5) (8.5) 3 ?.75 ?.8 c0.35 c0.35 (9.5) (8.5) unit: mm a type ap bp cp dp ep fp 4 ?.95 ?.05 ?.55 ?.3 c0.35 c0.35 5 ?.35 ?.05 ?.55 ?.3 c0.35 c0.35 unit: mm b type gp hp ip jp kp lp 4 (9.5) (8.5) c0.25 2.5 1.5 r0.475 5 (9.5) (8.5) c0.25 2.5 1.5 r0.675 ep hp gp fp ap cp ip fp ep ap dp bp cp lp kp jp hp gp 1. all products in this series in conformity eiaj standard rc-5320a. a large number of variation are available for any application. 2. lgp6501 and lgp6531 series may be used to flow soldering (dip). 3. lgp3131 and lgp3831 series may be used to reflow soldering (smd). 4. an smd-ready type model has a frame which provides resistance to twisting force. *twisting force : 49n cm (5kgf cm) 5. lgp6531-0800 and lgp0038-0100 out of the voltage categories of 4 and 5 have safety provision for momentary current shut-off resulting from twisting force. dc power supply plug / jack features products variation voltage classification 1 lgp2231-0100 lgp1821-0100 lgp1831-0300f 2 lgp6501-0100 lgp3131-0110 lgp1331-0200 lgp6531-0600 3 lgp3331-0100 lgp3131-0200 lgp1331-0100 lgp6531-0400 4 lgp3831-0200 lgp3831-0100 lgp0038-0100 lgp6531-0700 lgp6531-0800 lgp7031-0300 5 lgp7031-05 lgp7031-0700 rating voltage range[v] plug haness part no. through hole smd lead wiring jack llp0140 00 llp0141 00 llp0142 00 llp0143 00 dc10.5 |